Thread: 930 Cutting out
View Single Post
h2oplr11 h2oplr11 is offline
h2oplr11's Avatar
Join Date: Jul 2008
Location: Saint Robert, MO
Posts: 17
Send a message via ICQ to h2oplr11
Mark, thanks again for your suggestions. I'll have to look into that a little more. It turns out that I may have more than one problem.

A couple of weekends ago I finally decided to adjust the timing myself and found that the ignition wire from the voltage regulator to the distributor would arc against my hand while I was making my adjustments. Looks like it's time for a new wiring harness I would guess since all the wires are likely the same age. Anyone have any good ideas where to get an entire set that don't cost as much as a diamond ring??

I think this ignition problem may have added to my issue. I'm not so sure now that the problem was with my wastegate or overboost sensor.

'77 930 with a few mods to include intercooler and K27 turbocharger . . . who needs anything else?
Old 10-29-2009, 04:02 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #34 (permalink)