View Single Post
GJF GJF is online now
Slantnose from HELL
GJF's Avatar
Join Date: Dec 2004
Posts: 809
Slides will work just fine. Another problem people have when trying to run ITB's (slides included) on the street is that the throttle is 1:1 with the gas pedal. A cam follower needs to be used so the part throttle is more gradual. Meaning when all 6 ITBs are opening at the same part throttle position as the gas pedal was with a single throttlebody the acceleration curve is too touchy. By using a cam follower linkage, a custom cam can be made to increase or decrease the duration of the throttle. This would allow the engine to have good low speed drivability by having a moderate actuation of the ITB's from idle to the desired point.
87 911 Carrera platform
Twin Garrett's, Big Valve, Xtreme Cylinder Heads, JB Racing cylinders and machine work, custom JE pistons, GT2 EVO cams, GT3 oil pump, modified 3.2L intake, 80mm TB, custom Intercooler, equal length headers, DFI, KEP Stage 2 custom twin disc, G50 custom gear set, LSD, Tilton trans pump, Fluidyne cooler
Old 11-19-2009, 07:14 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #35 (permalink)