View Single Post
Mysterytrain Mysterytrain is offline
Registered User
Join Date: Mar 2004
Location: New Jersey
Posts: 1,862
I agree with Finstone that the link between pin 4 [controller] and pin 3 at the console switch are suspect. I would think that harness would go from the rear fuse panel into the tunnel. The SC's have a muti-pin connector on the rear fuse panel. The carrera's must have a connector also, I can't imagine the panel is hard wired to the harness. Since the wiring has been tampered with I would remove the rear panel and verify that the black wire is still soldered to the controller socket. Then look to see where those wires go. There might be a connector in the engine bay. The harness should then go into the tunnel.
I have to believe that the factory would have access points [like the wiring in your house] so that you could troubleshoot the circuit.
A quick and dirty test for the wiring north of the console would be to apply 12 volts to console connector.
Peace, Ron
78SC Targa 3.2 SS, 964 cams, CIS, SSI's,Dansk
Own a gun and you can rob a bank , own a bank and you can rob the world.
Old 11-20-2009, 06:00 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #16 (permalink)