View Single Post
911st 911st is offline
Registered User
 
Join Date: Jan 2004
Location: Sacramento
Posts: 7,269
I believe some have set them for more low end.

I recall one C2 Turbo I read about that was well set up for PCA class racing that did such.

This is probably worth looking at. Probably a solid idea with the stock wide ratio 4 speed transmission.

Especially if living withing any other limitations like small stock intake ports, stock I/C, small turbo, stock rod bolts, and / or trying to live withing the fueling limits of CIS.

Increasing average HP should make a car faster just as well as increasing peak HP can.

The stock cam is not a bad cam in that it keeps the effective compression rate higher than most cams used to increase peak HP.

Would be interesting to see a cam with the timing close to a stock Turbo cam but with the lift of a SC or C2 normal cam combined with larger ports.
Old 11-23-2009, 04:44 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #3 (permalink)