View Single Post
JFairman JFairman is offline
Registered User
Join Date: Jul 2006
Location: S. Florida
Posts: 7,274
1.25mm is the standard setting for intake valve lift at TDC for the beginning of the intake stroke for 964 cams too.
Maybe 993 and 964 cam profiles are same. SC and Carrera cams are milder and also the same profile so it kind of follows a pattern if so.

Anyway, I don't know if 993TT cams will work in a 930 motor.
If they will, just like 964 turbo cams you would have to cut off the power steering drive on the passenger side cam to fit them in a 930 motor.
The end hole on the right side cam tower is capped off with a pressed in steel plug because the 930 engine mounted oil cooler is right there.
Old 11-23-2009, 07:19 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #7 (permalink)