View Single Post
A930Rocket A930Rocket is offline
OFF THE BOOST PIPE NOW...
 
A930Rocket's Avatar
 
Join Date: Oct 2003
Location: Mount Pleasant, South Carolina
Posts: 7,417
+1 on grinding a hex key down. In fact, grind it down slowly or use a file, trial fitting it and hammer it the last bit for a super tight fit. Might want to get two of them...

The chisel method will work as well. Start at the bottom of the nut and at an angle to bite into the nut. Keep hammering away until it turns.

I used copper jam nuts on my rebuild.
Old 11-28-2009, 07:28 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #6 (permalink)