View Single Post
RarlyL8 RarlyL8 is offline
Crotchety Old Bastard
RarlyL8's Avatar
Join Date: Jan 2000
Location: Huntsville, AL
Posts: 13,563
Looks like this may be a worst cast scenario install. Good to document these issues and how to work through it.
Try to avoid cutting off the exchanger as you risk damaging the oil lines/tubes among other things.
It is difficult to get to those nuts with the exchanger in place. A long shaft air chisel can be used if you can slot the barrel nut or force a small chisel bit into the rounded hex hole. Drown the area in your favorite penetrating oil.
RarlyL8 Motorsports / M&K Exhaust - 911/930 Exhaust Systems, Turbos, TiAL, CIS Mods/Rebuilds
'78 911SC Widebody, 930 engine, 915 Tranny, K27, SC Cams, RL8 Headers & GT3 Muffler. 350whp @ 0.75bar
Brian B. (256)536-9977 Service@MKExhaust Brian@RarlyL8
Old 11-29-2009, 08:09 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #8 (permalink)