View Single Post
RarlyL8 RarlyL8 is online now
Crotchety Old Bastard
 
RarlyL8's Avatar
 
Join Date: Jan 2000
Location: Huntsville, AL
Posts: 13,425
Garage
As Ron stated the hose clamps must be removed.
The breather hose is connected to the breather pipe on the top side of the engine. This is a difficult place to reach but can be done. Unhook the breather hose on the distal end and then rotate the hose clockwise / ccw several times to break the seal and pull it off.
The turbo oil tank and kit you purchased do not have this breather line so you need to cap it at the air cleaner assembly.
__________________
RarlyL8 Motorsports / M&K Exhaust - 911/930 Exhaust Systems, Turbos, TiAL, CIS Mods/Rebuilds
'78 911SC Widebody, 930 engine, 915 Tranny, K27, SC Cams, RL8 Headers & GT3 Muffler. 350whp @ 0.75bar
Brian B. (256)536-9977 Service@MKExhaust Brian@RarlyL8
Old 11-29-2009, 03:39 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #16 (permalink)