Thread: K27 7200 or s
View Single Post
RarlyL8 RarlyL8 is offline
Crotchety Old Bastard
RarlyL8's Avatar
Join Date: Jan 2000
Location: Huntsville, AL
Posts: 13,563
You need a solid 400whp in your 930 to keep up with a new 505HP Z06.
A buddy did this using an HFS, headers, cams, head work and tuned AFRs.

Yes the "S" mod is an enlarged machined conical cold side inlet on a 7200. Cost is $100 over the standard 7200. Mod is good for 300rpm threshold on a stock 930 but you need to enlarge the down pipe to take full advantage of it. That mod was designed to be used with the stock 965 down pipe as it is less restrictive than that of the 930.
RarlyL8 Motorsports / M&K Exhaust - 911/930 Exhaust Systems, Turbos, TiAL, CIS Mods/Rebuilds
'78 911SC Widebody, 930 engine, 915 Tranny, K27, SC Cams, RL8 Headers & GT3 Muffler. 350whp @ 0.75bar
Brian B. (256)536-9977 Service@MKExhaust Brian@RarlyL8
Old 12-11-2009, 06:23 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #14 (permalink)