View Single Post
petri petri is offline
Registered User
petri's Avatar
Join Date: Feb 2007
Location: Finland
Posts: 348
I have BlownsixDesign 930 Full Width Race Application mounted in my RUF BTR and I've been very happy with it. Even if they don't sell it as "bolt on application", the fitment wasn't too difficult: My suggestion is, you would get this one fit just with right size rubber hoses and one support arm in the right side (you can make it easily from aluminum plate). When mounting just loosen the air intake bolts, mount the intercooler and then tighten the intake bolts, and there it is.
You can either stick with the existing dump valve or change to some more aggressive pop off application like Tial or something.
Garage: Strosek 911 RUF BTR|Strosek 911 3.6 rat RSR|Strosek 928SR|928S4R|928S|996C2RSR...and more... Altogether 11 Germans - 3 Italians - 2 British
Old 12-26-2009, 02:22 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #15 (permalink)