Thread: ABS not working
View Single Post
paganrj paganrj is offline
Registered User
 
paganrj's Avatar
 
Join Date: Nov 2007
Location: Houston
Posts: 119
Garage
Quote:
Originally Posted by WERK-I View Post
Have the brakes been bled recently or brake fluid level dropped to a very low level at any time?
Dave,
The answer is yes to both but the ABS light was on before that (??).
I did run the test Kris recommended. After testing all 4 sensors they all produce AC voltage when the wheels are turning. Something that might be an indication of a problem is a result after the way I tested the rear sensors. With the engine running and the rear wheels turning there is a voltage difference between right and left sides, in 1st gear 0.4 vs 0.6, in 5th gear 0.8 vs 1.1 V AC. I wonder if that can be an indication of a bad sensor (system can be confused by the voltage difference) or if it can be considered normal. If it is I will try to find out if the problem is related to the ABS relay.
Thanks to all ......R
Old 12-29-2009, 05:45 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #6 (permalink)