Thread: Tach has tanked
View Single Post
JFairman JFairman is offline
Registered User
 
Join Date: Jul 2006
Location: S. Florida
Posts: 7,274
If you remove the 6 pin plastic plug in the bottom of the permatune CDI, then carefully pull back the rubber boot to see the wires you will see the skinny black and purple tach signal wire 930rocket is talking about.
I think it's on one corner of the plug.
It may go through that thin seperate section of the wire harness with a plug at the bottom of the picture.

Make sure all 6 spade terminals are locked into the plastic plug and they are all pushing onto the male spade terminals on the CDI box when you push the plug into place.
They are old and the locking pins on the side of the female spade termainals in the plug can be bent by now.
Old 12-29-2009, 06:10 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #4 (permalink)