View Single Post
JFairman JFairman is offline
Registered User
Join Date: Jul 2006
Location: S. Florida
Posts: 7,289
It looks alot like a K27 7006 turbine/hot side from the size and positioning or offset of the exducer of the turbine wheel in the housing.
I can't read the numbers on the turbine housing.

The compressor side is a guess. It would help to hold a tape measure across the intake opening.

You should take the compressor housing off the backplate and clean all the dirt out with brake clean, rags, and q-tips on the compressor baldes.

Take the 10mm bolts out and lift it straight off without hitting the compressor wheel.
Then you can measure the inducer, exducer, and depth of the wheel and there are websites with the dimensions of all the different 3k compressor wheels.

There is a big silicone o-ring in a groove on the backplate. Don't pinch it when putting it back together.

And try calling Andial and ask them what it is
Old 01-11-2010, 07:54 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #6 (permalink)