View Single Post
voitureltd voitureltd is offline
Registered User
Join Date: Feb 2008
Location: Bayside Wi
Posts: 2,553
This is RWHP so over 400 flywheel with 100 leaded @ near14 psi boost. Electromotive XD12ECU @ 25 BTDC. Another setting will program in more fuel and another 4 degrees to 29 BTDC when using 110 octane fuel. Enrichment is both Andial and Miller Woods set ups with larger injecters and injecter blocks to the hone matched intake and heads. We did not do another pull that way as fuel and time did not permit however the shop said it woud have some more HP but do not use the 4 more degrees but for short runs like 30 secs or so.. Motor inside is 7.5 compression 3.4 w B&B headers, Tial waste gate, heads ported and polished to 38MM larger intake exhaust valves, not sure of the cam grind, Garrett GT35R and lower end just redone with the good stuff. I suppose I could use more boost but this shop builds road race motors to last so they recommend pretty conservative boost levels.
Anthony @ Voitureltd Bayside WI.

Last edited by voitureltd; 01-24-2010 at 12:39 PM..
Old 01-24-2010, 12:08 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #54 (permalink)