View Single Post
911st 911st is offline
Registered User
Join Date: Jan 2004
Location: Sacramento
Posts: 7,269
Why not just put a set of shortie throttle bodies under a plastic 3.6 manifold?

Could go with factory ITB RSR throttle bodies or custom.

Protomotive has made 750hp through such a manifold with stock location TB.

I think the runners are 43mm or larger.

Having a bit of a pressurized plenum in front of the Throttle bodies should be a plus to.

This also gets the TB's closer to the intake valve than a high butterfly set up for arguably faster response.

Seems more elegant and less costly than using PMO's and having to cobble together plenums and plumbing to work with them.

However, if one needs dual injectors per hole it probably would not be the best choice.

Only would need one connection to the intercooler and ensure balanced pressure to each side.

It is just an idea.
Old 01-26-2010, 05:06 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #63 (permalink)