View Single Post
Twisted Minis Twisted Minis is offline
A new breed
Twisted Minis's Avatar
Join Date: Jan 2010
Location: Windsor, California
Posts: 23

Here is a piece of the tab that will capture the bell crank in double shear. I decided to keep with the double plated bolt holes I started on the bell crank on all the tabs back here. You can also see below it, a custom spacer I machined for the coilovers since they are not a standard size.

The setup is almost done here. I still need to do some clean up when it comes back, like capping off the open ends of the tube, and patching the floor back in all the way and sealing it up.

If you can find it cheaper, I can fix it!
Old 02-02-2010, 06:54 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #8 (permalink)