View Single Post
m42racer m42racer is offline
Registered User
 
Join Date: Jan 2006
Posts: 174
If your Ignition system has Knock control, (can retard timing based upon parameters set by user) then it comes down to fitting a sensor and some sort of signal conditioner.

This is as important as the ECU control. Frequency type, noise level and the ability to distingush between mechanical noise and knock is going to be your issues.

Call Performance Developments 949 646 7461. Ask Neil about the new Link G4 Knock block. They are also very knowledgeable about fitting sensors to the Porsche engine. They have done this many times over and its works really well.

If your ECU will accept an input from the Knock Block, then your set.
Old 02-07-2010, 02:35 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #22 (permalink)