View Single Post
mark houghton mark houghton is offline
Registered User
mark houghton's Avatar
Join Date: Jul 2008
Location: Central Washington State
Posts: 3,779
Originally Posted by JFairman View Post
Hi Mark, just trying to help...
I drew a green arrow to the bolt hole under your hose clamp on the intake manifold that aftermarket longneck intercoolers use for support with an aluminum arm welded to the end tank of the intercooler.
...and I appreciate the help and suggestions, as always. I was thinking of using either that bolt hole, or the other one directly in front of the new BOV location, and fabricating a stiff aluminum bar to mount from there to one of the two studs available on the coupler.

I'm about ready to test drive this thing, but may work on making the coupler a bit more rigid first....or just weld a support on to the IC as suggested (but that goes against my original goal of not having to modify the IC).
Mark H. 1987 930, GP White, Wevo shifter, Borla exhaust, stock everything else. The result of a massive Pelicanite good will fire recovery effort. Truely an open book, ready for the slippery slopes to modification.
Old 02-19-2010, 10:29 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #11 (permalink)