View Single Post
mark houghton mark houghton is offline
Registered User
mark houghton's Avatar
Join Date: Jul 2008
Location: Central Washington State
Posts: 3,776
Originally Posted by ertech View Post
Hi any of you have a pic on how to mount the front driver side of the I/C with the new style BOV . for the throtle body part I cut and revelded the stock BOV . for the elbow side I put a reducer going to the elbow and now have no were to mount the IC
Did the posts on this thread answer your original question? If I read you correctly, you've done a similar approach as I have done...hacking up the stock diverter valve...but used a reducer instead of the leftover piece that I used. I saw a picture not too long ago of a bracket welded to the back the IC, going down to the point that I used for mounting my latest creation. I think JFairman may have a picture or two of his assembly.
Mark H. 1987 930, GP White, Wevo shifter, Borla exhaust, stock everything else. The result of a massive Pelicanite good will fire recovery effort. Truely an open book, ready for the slippery slopes to modification.
Old 02-20-2010, 08:37 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #23 (permalink)