View Single Post
DonE DonE is offline
Wo ist die Rennstrecke?
 
DonE's Avatar
 
Join Date: Mar 2004
Location: Brooks, GA
Posts: 1,211
Quote:
Originally Posted by copbait73 View Post
Don, you are twin plugged plus you obviously did a lot of test and observation.
Did you notice any patterns top plug to bottom plug or cylinder to cylinder?
Could you or did you disable to bottom row?
I didn't notice any difference cylinder to cylinder or top to bottom. Yes, I can disable top or bottom, but I didn't.

When I changed from wasted spark to CDI, I immediately noticed a smoother idle and better throttle response - it was amazing to me because the change was so noticable.

When I got down to tuning, I left the fuel alone and started playing with the gaps first (major pain in the ass with 12 plugs). When the gaps were too much, the engine would stumble and miss, especially at higher rpm. That's when I found the best gap was .032.

Then I tuned the timing - I didn't need as much mid to top, but low end was improved big time (I think it's equal to any 3.2L NA car now). By backing off the timing (a couple degrees), adding some more fuel (because it's now being burned completely), I could take the boost up to 1 bar safely (I have 8.0:1 CR).

Once this was dialed in, I started tweaking the fuel tables throughout to achieve a nice tan color on the plugs, proving I had the right AFR for the majority of my driving. In fact, I use the AFR meter to confirm what my plugs are telling me, not visa versa. To be clear, over 120 kpa or .2 bar, I start adding fuel fast and start moving timing back to 18 degrees at 6500 rpm at 1 bar.

Another indication my CDI and plug combination was working well, was when I floored it and there was no more puffs of black smoke (like when I had wasted spark using the same fuel table values). I found I could add more fuel which gave me more power.

Sorry to be so long winded on this, but I think the ignition system is sometimes overlooked in favor of turbos or headers. All components have to work together, but not much beats getting the fire lit quickly and completely while jamming as much fuel and air into the cylinders.

By the way, Neil Harvey at Performance Developments recommended the NGK plugs after I spent a couple hundred bucks experimenting on my own. He sold me the M&W CDI. Listen to the experts.
Old 03-03-2010, 07:27 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #12 (permalink)