View Single Post
HaltechClaudio HaltechClaudio is offline
Haltech Speciallist
Join Date: Mar 2010
Location: The World
Posts: 5
Send a message via ICQ to HaltechClaudio Send a message via AIM to HaltechClaudio Send a message via MSN to HaltechClaudio Send a message via Yahoo to HaltechClaudio Send a message via Skype™ to HaltechClaudio
You're all welcomed guys! I can honestly tell you that anything is possible when using these units, pretty much all possible angles can be covered.

Let me give you a quick run down, you can run the stock dissy from an old air cooledmotor, you can use the 60-2 trigger sometimes found on a few more modern years, you can build your own custom setup as ive described in the previous post, you can customize your existing hardware, or add some more.

These cars are loads of fun, power potential from what ive seen is incredible, all it takes is a little information, which we can provide!

Here are the sensors we have, this is the "GT101", its a single channel hall effect sensor that is similar to some bosch units as far as dimensions and installation style.

Here are the rest, from left to right, "Red Hall Sensor", "S4 (dual channel)", "S3 (dual channel)". The S3 and S4 are the ones that use "rare earth magnets".

And of course, Haltechs are perfectly capable of reading of most reluctor style sensors. All it takes is a little patience and the right settings.
Old 03-05-2010, 02:53 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #57 (permalink)