View Single Post
mooney265 mooney265 is offline
Tinkering Pays!!
 
mooney265's Avatar
 
Join Date: Sep 2008
Location: New Orleans
Posts: 1,365
Garage
Quote:
Originally Posted by JFairman View Post
You could remove that fitting by carefully cutting it not too deep with a dremel and peeling the rest off with needle nose pliers and then replace it with a hose clamp snugged down on the hose.
That sounds like a possibility... Just for clarification: the leak is on the passenger side [supply side] of the oil cooler. I just didn't have a good picture of that fitting. I've got the hose off, now - - and, will try to remove the leaky fitting.

Thanks
__________________
LIVN80S - - Red '79 Porsche 930 Steel Slant Nose Conversion [in 1987] w. 46k miles 3.3L; 964 Cams; K27HF @ 1.0 BAR, with Garrettson Intercooler; Rarly Zork; CIS Flowtech Fuel Head & BL-WUR.

Last edited by mooney265; 03-13-2010 at 08:30 PM..
Old 03-13-2010, 08:28 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #4 (permalink)