View Single Post
aerodyn930 aerodyn930 is offline
Registered User
 
aerodyn930's Avatar
 
Join Date: May 2007
Location: Daytona Beach
Posts: 214
Hello, Having done a couple of these installs, I would like to offer some info:

1- turbocharger to I/C inlet hose (very expensive , if yours is not serviceable a
replacement can be fabricated)
2-Coil bracket,( it has a different location for the I/C rear mount.
3-main I/C support mounts (they are mounted on intake manifold),
4-auxiliary air valve to I/C hose (different layout)
5-90 degree duct out of air flow meter with provision for recirculating(BOV) valve
6-Stock or aftermarket recirc. valve
7-Block off plate for Intake temp sensor
8-after removing your factory recirc. valve housing(if applicable) a connecting tube is needed between the 90 degree duct out of air flow meter to the metal duct going to turbocharger inlet.

as you know the A/C condenser has to be relocated out of the spoiler, also fabricate a restrictor baffle to promote airflow thru the I/C core.

as I am in the process of testing different I/C's will provide photos in a day or so.

If you need any of these parts fabricated, P. M. me

Regards , Lou
AERO DYNAMICS
Old 03-15-2010, 07:21 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #9 (permalink)