View Single Post
Rob 930 Rob 930 is offline
Registered User
 
Join Date: Dec 2002
Location: Seattle
Posts: 660
Jim,

Unfortunately, I don't have good photos, but here's one that may help. This shows the IC off the car and lying on its back. On the left side of the photo, you can see a brass fitting (that was already in a port on the IC when I got it) that I drilled out and tapped for the Davtron inlet temp sensor. The white wires are the pigtails on each of the Davtron sensors. The actual location of the Davtron outlet temp sensor can't quite be seen in that photo, but it is located in a tapped hole I drilled into the 3 in. pipe that goes from the IC to the TB. The brass fitting on the right side of the IC in the photo is the IAT sensor. So the IAT and Davtron temp sensors are within a few inches of each other. Hope this helps.

drmatera,

Email sent.

Rob

Old 03-18-2010, 01:12 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #45 (permalink)