View Single Post
RarlyL8 RarlyL8 is offline
Crotchety Old Bastard
RarlyL8's Avatar
Join Date: Jan 2000
Location: Huntsville, AL
Posts: 13,551
Jacob, I installed a Kokeln a bit ago and had a devil of a time with it. Nothing fit the 930. When all was said and done the results were good but the fitment still bad. It didn't seat on the throttle or on the turbo up-pipe. None of the posts fit correctly.
The turbo down-pipe for the 964T will not properly fit the 930 chassis. It helps if you use a longer 90* hose into the turbo. It is worth retaining this plastic pipe if you can make it work. It looks like in your previous thread you did get it to clamp together.
RarlyL8 Motorsports / M&K Exhaust - 911/930 Exhaust Systems, Turbos, TiAL, CIS Mods/Rebuilds
'78 911SC Widebody, 930 engine, 915 Tranny, K27, SC Cams, RL8 Headers & GT3 Muffler. 350whp @ 0.75bar
Brian B. (256)536-9977 Service@MKExhaust Brian@RarlyL8
Old 03-23-2010, 08:38 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #7 (permalink)