View Single Post
WERK I WERK I is offline
Forced Induction Junkie
 
WERK I's Avatar
 
Join Date: Jan 2003
Location: Wisconsin
Posts: 3,291
Garage
Couple of things;
The white ABS couplers will work as well.
If you have problems finding a metric bolt long enough, you can use these studs as well. You can find them everywhere, Home Depot, Lowes, ACE HW, etc. I believe it is 3/8" , about 3 feet in length (then cut to length you desire) The threads are so close to the metric equivalent, that it go in without damaging either threads and will provide sufficient clamping to get the job done. Just be sure to use a hardened washer and nut to secure the stud to the grease cap.


__________________
Dave
'85 930 Factory Special Wishes Flachbau
Werk I Zuffenhausen 3.3l/330BHP Engine with Sonderwunsch Cams, FabSpeed Headers, Kokeln IC, Twin Plugged Electromotive Crankfire, Tial Wastegate(0.8 Bar), K27 Hybrid Turbo, Ruf Twin-tip Muffler, Fikse FM-5's 8&10x17, 8:41 R&P
Old 04-01-2010, 06:37 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #7 (permalink)