View Single Post
911st 911st is offline
Registered User
 
Join Date: Jan 2004
Location: Sacramento
Posts: 7,269
Mooney,

I am not an expert but I am a bit concerned about what your guy did with the dual pot on your single pot dist.

A vac-retard pot is going to pull to retard. A dual pot pushes to retard.

If you put a push pot in place of a pull pot, hooked up to the boost retard connection you will get 'boost advance'.

You can work with Boost Retard, Vac-Advance, and or Vac-Retard. Not boost advance. You could get Vac advance by hooking to the other side of the pot. If you do that you would want to time it with the tube hooked up at 4000rpm. Also you need a connection at the TB that dose not show Vac at idle and it basically blocked (ported Vacuum).

You can check this with a hand pump at idle. Advance increases idle speed.

Can I get a ya or a na on this from someone else.

Last edited by 911st; 04-01-2010 at 06:41 AM..
Old 04-01-2010, 06:38 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #57 (permalink)