Thread: Innovate LM2?
View Single Post
billjam billjam is offline
Certified User
 
billjam's Avatar
 
Join Date: Aug 2007
Location: Perth, Western Australia
Posts: 1,996
Garage
Quote:
Originally Posted by Helmsy View Post
Has anyone used/installed a LM2 yet?

I have ordered one to install and was wondering where others have installed them and also the best place to hook up the inputs.

I am thinking of getting an aftermarket MAP sensor for logging boost but where is the best place to hook up to log RPMs?

I am hoping to log AFRs, RPMs and boost and try to figure out some tuning issues.
Ben,
I can't help with LM2 but FWIW I have LC-1, LMA-3 (aux box) and G5 AFR gauge installed and working fine. I mounted the LMA-3 under the RH seat. The LC-1 (for the O2 sensor) is in the LH side of engine bay. Let me know if you want pics.
LMA-3 has a MAP input port direct from the manifold so I didn't have to setup an electronic sensor, which is convenient.
I had a few problems getting it all working properly and eventually sent the LMA-3 back to Innovate for repairs, after which it was fine. I can log MAP, AFR, RPM, acceleration and side G. I have another input connected to speedo sensor but can't get it calibrated properly.
I have wiring diagram as fitted in my car if you want, but I expect LM2 may be different. Still, it may give you some ideas if you are starting from scratch.
__________________
Bill
1988 Carrera - 3.6 engine (with ITBs, COPs, MS3X) and a whole set of turbo body panels waiting in the attic.
Day job ... www.sspowdercoat.com.au
Memories: '68 912, '72 911T, '80 911SC, '84 911, '85 930, '86 930, '87 911
Old 04-02-2010, 05:47 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #8 (permalink)