View Single Post
mkingham mkingham is offline
Registered User
 
Join Date: Sep 2009
Location: Winter Haven, FL
Posts: 48
help with short 930 tranny helper spring

I have a rebuilt, short bell housing 930 that I purchased. It has the throw out lever and the adjustment lever, but no helper spring. I can not find any good pictures of what this assembly looks like for a circa 1977 930 tranny. Can someone upload a photo?

The diagrams on our host's catalog are all for 915 throw out arms, which seem to have many more parts (bearings, clips, washers, etc). The pin that sticks out of my throw out arm (and the one on the tranny) are smooth. They don't look like any sort of clip goes on them to help hold the spring in place. Below is a photo of the throw out arm.

Also, there is a notch in the adjustment lever for a spring (I think), but there seems to be no place on the under side of my tranny to attach the other end. I have uploaded a photo of the underside of the tranny below as well.

Any help would be greatly appreciated!


Notice the pin on the arm, what holds the helper (omega) spring on?



I purhcased this spring from Pelican, but I think it is for a later 930 tranny.
__________________
1984 930 Cab LS6 Conversion
www.kingham.com/porvette/
Old 04-04-2010, 10:20 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)