View Single Post
Brad Beck Brad Beck is offline
Registered User
 
Join Date: Jan 2006
Location: South Carolina
Posts: 398
FS: 2.7 engine & 915 4speed trans

I have a 2.7 based on a 72 2.4 engine. It was built in 1982 with new 2.7 euro spec pistons and cylinders, E-cams, turbo tensioners, and Weber’s (jetted to match engine specs). All new bearings, the heads were ported and rebuilt. The car was wrecked in 1983 with around 10,000 to 12,000 miles on engine and has been setting since. I started it every month or so for around three years until the starter died, from then I would put some oil in the cylinders and rotate it a couple times a year since. I pulled the plugs and one had some rust indicating water had gotten in that cylinder (I don’t think much because looking in the cylinder, it looks fine), it turns over fine. I also pulled the upper valve covers and the cams look perfect, no pits or rust. As you can see the heat exchangers are shot. Selling it with 72 915 4 speed (was shifting fine) and Perma-tune CD unit.

$2,000 obo, Located in Sumter, SC 29150 would prefer locale pickup but can ship at buyer’s expense.

SOLD. Thanks Chris!

Brad Beck
Daytime # 803-905-3447
Cell # 803-983-0523



__________________
"If everything seems under control, you're just not going fast enough."
- Mario Andretti

Last edited by Brad Beck; 04-15-2010 at 12:06 PM..
Old 04-06-2010, 07:05 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)