View Single Post
WERK I WERK I is offline
Forced Induction Junkie
 
WERK I's Avatar
 
Join Date: Jan 2003
Location: Wisconsin
Posts: 3,291
Garage
jcc,
You need a very accurate air pressure regulator running off an air compressor. Set the regulator to .5Bar (~7.35psi) and feed the air pressure to the pressure side of the wastegate, keeping the wastegate vent line open (vented to atmosphere). You may have to have to engine running at idle to test this since some wastegates use some of the exhaust pressure to open the wastegate valve.
__________________
Dave
'85 930 Factory Special Wishes Flachbau
Werk I Zuffenhausen 3.3l/330BHP Engine with Sonderwunsch Cams, FabSpeed Headers, Kokeln IC, Twin Plugged Electromotive Crankfire, Tial Wastegate(0.8 Bar), K27 Hybrid Turbo, Ruf Twin-tip Muffler, Fikse FM-5's 8&10x17, 8:41 R&P
Old 04-17-2010, 04:56 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)