Thread: 3.2 Conversion
View Single Post
mb911 mb911 is offline
Registered User
 
Join Date: Jan 2003
Location: Burlington, Wisconsin
Posts: 9,314
Ben,

I went with a GSF drip tank then used AN fittings to go straight to the scavange pump then the scavange to the lower valve cover. It works well. I don't remember sixes at the moment but I think it was a -8 to -6 conversion fitting then -6 to the pump with a -6 to 10mm metric adapter then a -6 to 10mm adapter to a -6 180 on the pressure side then a -6 to 3/8 NPT fitting into the valave cover. the only thing I don't remember is if it was 10 mm or 12 mm adapter though you could figure that out easily by looking at PET for the size of the banjo bolts the factory used. Hope that helps
__________________
Ben

914-6 2.4s GT tribute.
914-6werkshop.com manufacturer of 914-6, GT, Conversion parts
Old 04-27-2010, 04:32 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #3 (permalink)