View Single Post
JFairman JFairman is offline
Registered User
Join Date: Jul 2006
Location: S. Florida
Posts: 7,274
930 CV joints are the same on each end. They bolt on to the flanges at the stub axle and the transmission.

I think the Carrera's used the non bolt on outer CV like the one in your pic.

The inner one with the 10mm bolts should be the what the 1986 and later 930 used on each end. The 993 TT used them too.

1985 and earlier 930's used a thicker CV joint and an axle with slightly longer splines to go through the center of the thicker CV joint. It's believed these were stronger.

Look up the part numbers on them and see what they fit in the pelican catalog or call the parts department.
Old 05-20-2010, 08:53 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #4 (permalink)