View Single Post
forwheeler forwheeler is offline
Registered User
 
Join Date: Oct 2007
Location: Idaho
Posts: 193
cam sprocket alignment question

I am putting the cams back in and have a question about alignment as outlined in the book. Please check my math.

I have an early case (79) so I am using the early case measurement for the intermediate shaft. Mine measures out to 2.043".

For the left sprocket measurement I get 1.110" and the book says to subtract 54.8mm (2.157") which equals -1.047.

It says these are supposed to be equal but this is an inch off so what am I doing wrong? Yes I subtracted out the straight edge thickness.
Old 05-20-2010, 12:21 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)