View Single Post
JFairman JFairman is offline
Registered User
Join Date: Jul 2006
Location: S. Florida
Posts: 7,274
I used hylomar the first time i put mine back on and it slowly dripped because it's warped.
Second time i used a thick layer of RTV red silicone because thats the only thick gasket sealer I had that would fill in the gap between the stud holes because mine is warped.

Then I wiped off the excess sqeezed out silicone and let the it dry overnight before refilling the transaxle with oil.

Anyway, this time it hasn't leaked or sweated oil at all
Curil T gasket sealer is thick enough to be applied thick and it would probably work too.

Hylomar is too thin, and Copper coat would also be too thin.
Permatex aviation #2 non hardening gasket sealer would also probably work.

I guess loctite 574 would work but I hate cleaning that hard stuff off in the future so I never use it.
Old 05-25-2010, 07:10 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #5 (permalink)