View Single Post
911st 911st is offline
Registered User
Join Date: Jan 2004
Location: Sacramento
Posts: 7,269
More info please and any pictures please.

What boost level was it run at?

Were the heads and cylinders junk because of the work or detonation?

Were there fins on the cylinders?

Was it a twin plug?

Was 91 octane fuel run and at what boost?

Any track time on the motor?

Did it have an Andial Fueler?

A stroked 3.4 for a 3.5 should be a nice motor in most cases. Because of fuel deliver limitations of CIS this type of build is really only to fill in the low and mid range of the power curve, not a motor to run any more HP than a built 3.3 would.

It dose run at a higher compression ratio than stock and needs a lot of fuel so the boost probably can not be run much past .8 bar or it would probably go lean.

Even the Andial Fueler is probably not going to keep it from going lean above about .8 bar at increased boost levels. 1 bar above 5500rpm would most likly kill this motor even with the fueler turned all the way up.

Just a guess.
Old 06-12-2010, 08:38 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #7 (permalink)