View Single Post
smurfbus smurfbus is offline
Turbofrog
 
smurfbus's Avatar
 
Join Date: Aug 2009
Location: Europe
Posts: 1,384
Put the 044 at the rear and still lean. Also measured the pressure between the pumps (1.6bar) but the joint was leaking (could not find real good adapters) so I figured a test drive would show any differences. The front pump over the front sheild looks like it needs tank siphoning to remove so I postponed it for later.

Result: A bit richer but not enough.

I'm not sure which these 'new bosch pumps' that were installed before I bougth the car are as there are no marks or labels on them? Next I'm going to swap the rear bosch(?) for the front and see if that makes any difference. I think I'm going to install a new 044 for the front too if there is enough space. The rear one took some effort to fit too bt it was not too bad.
Old 06-18-2010, 01:01 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #32 (permalink)