View Single Post
JFairman JFairman is offline
Registered User
 
Join Date: Jul 2006
Location: S. Florida
Posts: 7,223
If you mean the 10mm nuts on the bottom side, removeing the heater hoses on both sides will make some room to get a wrench under there.

Thats after removing the long bolts and cross bar and lowering the motor a little. If the large bolts are corroded stuck in the ends of the cross bar use an impact wrench or the bar will probably twist with the bolt and bend at the ends.
Old 06-20-2010, 09:40 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)