View Single Post
930cabman 930cabman is offline
Registered User
 
Join Date: Jan 2008
Location: sunny buffalo
Posts: 504
lucky

I found when installing the four lines to the T stat, one was a little difficult to get threaded. Find the easy one(s) and start the threads on that one last. Also I had to modify a 1 3/8" open end wrench to allow access to the affair. It does take a bit of time and patience and loosening the straps that hold the cooler lines to the underside of the frame will help to get the oil lines started.

I have been lucky to stop the oil leaks within my system, but still appears to be running too hot.

Good luck
Old 06-23-2010, 06:59 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #11 (permalink)