Thread: MPS
View Single Post
John Rogers John Rogers is offline
Registered User
 
John Rogers's Avatar
 
Join Date: Dec 1969
Location: chula vista ca usa
Posts: 5,214
Sounds like JP has it about right. I'll bet the hoses are not quite right,check the hose diagram at: http://www.pelicanparts.com/914/technical_specs/914_20FI_diag.htm
Note the line to the MPC has the vertical connector all by it self on the intake plenum. The PVC line goes to that double plastic fitting at the side of the plenum. It is very possible to get pressue in the PVC line at hi revs and that could have forced the oil into the MPC.
Old 12-07-1999, 06:20 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #4 (permalink)