|
Yes sir, Verify the type of stainless braided hose,( It probably is "AQP"), If it is be carefull as it is only rated to 300 degrees F. , That hose uses a elastomer liner,
The last 3-4 inches of the supply line (as they go into the turbo) will be exposed to higher temps.
I recommend aeroquip 666-667 teflon lined hose, (also braided stainless), it is normally used in aerospace applications, (500deg. F. )
I have seen a 'AQP" hose fail in the turbo inlet of a 3.2 converted car, If interested I can give you Ph. numbers where that type of hose can be ordered,
Lou/ AERO DYNAMICS
(386) 304-0380
|