View Single Post
rono rono is offline
Registered User
Join Date: Sep 2002
Posts: 4
Got them in!

Thanks for the help. I was able to get them in and aligned today. I noted the other posts asking for help also. One thing I learned today is that there seems to be 4 adjustments: Outer 2 bolts, inner 3 bolts, which notch the cantilever is in when attached to the motor, and the motor itself.

I used the inner and outer bolts to fit rear height and squareness in the cutout. The height of the front was course adjusted by selecting the right position on the motor drive. The final front height adjustment was made by loostening the 3 motor mount bolts and turning the motor. If your lamp is down, you will see the front of the cover move up and down about 5 mm.

Hope this explanation helps someone else...
Old 09-26-2002, 05:05 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #6 (permalink)