View Single Post
cole930 cole930 is offline
Registered User
 
Join Date: Mar 2000
Location: Auburn,In. U.S.A.
Posts: 2,449
Guys,

The part is the rear sunroof pivot bolt and special nut that is used to adjust
the heigth of the rear of the sunroof. As the sunroof closes it's last movement is to raise the rear edge of the sunroof to sit flush with the rear roof panel. This bolt
allows adjustment of the heigth of the pivot arm so the two panels will sit flush.

The bolt ( hex head, threaded body or male portion of the fastener assy. ) is a M4 x 6 MM standard metric bolt available in the metric bolt section at most local hardwares.
The nut ( special serrated nut with locater and taped hole or Female portion of the fastener assy. ) The standard nut that fits the M6 bolt should work in a pinch. Looked quickly in the pet but did not find the nut. You can get the pivot assy. with the bolt and nut from any Porsche dismantler, Oklahoma Foreign Car,
DC Automotive, Parts Heaven and possibly Evil Bay. Our host should be able to get a new pivot assy. if they are still available. This very part has been used in every sunroof Porsche for well over 30 years.

Good Luck !!!!
Cole
__________________
Cole - 80 930 "The Old Sled"
Mods: TurboKraft Custom IC, 934 Headers, GSX 61, Zork, Port Work, SC Cams, Air Mod Fuel Dist Relocated, Water Meth Injection, BL WUR, MSD 6530, Greddy EBC, Synapse Bov, Short 2nd & 3rd with 8:37 R&P, Wevo Shifter, Coupling, and Mounts, MTX-L SSI-4, Big Brakes, Rebel Coilovers, Bilstein Sports.
Old 09-15-2010, 06:23 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #3 (permalink)