View Single Post
A930Rocket A930Rocket is offline
A930Rocket's Avatar
Join Date: Oct 2003
Location: Mount Pleasant, South Carolina
Posts: 8,664
Pretty much covered it.

Warm up the engine for a few minutes.
Drain the tank.
Drain the sump.
Pull the filter (check to make sure the old gasket was removed).
Install new filter (with a small amount of oil on the new gasket).
Fill the tank with 10 quarts
Check level and be prepared to add 1 more quart.

IIRC, the oil pressure is 1 bar per 1000 RPM. You might have a bad sending unit?
Old 10-01-2010, 05:44 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)