View Single Post
smurfbus smurfbus is offline
smurfbus's Avatar
Join Date: Aug 2009
Location: Europe
Posts: 1,600
Update: Removed the BB oilsump and it was pretty clean BUT the uplink to the scavenge pump was a bit kinked.

It had been like this for a long time but the track session finally blocked it enough so that the pressure started to build up in the system and I THINK some of the oil went to the intake and some blew threw the IC and leaked above the engine from the TB connection as it was all oily from there to the front of the engine and oil dripped anywhere from the trans engine connection area in a big way.

The RR of the sump took almost the whole day as the FIT is really poor and I had to hammer/pound one corner of the cump big time to get it installed without touching the WG pipe like it used to do.

Now after 4 hours of driving with some bad odors still vaporizing out it was almost smoke free, knok knok knok.
Old 10-04-2010, 02:39 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #15 (permalink)