View Single Post
Wayne 962 Wayne 962 is offline
Author of "101 Projects"
 
Wayne 962's Avatar
Hi Tim,

According to the factory manuals, intermediate shims are available in 2.3 and 4mm thick. A 1 mm shim results in appoximate 10' change of camber.

With respect to your wheels, they are not stock, so I believe that the offset is not properly set up for a 914. If you had the stock wheels on there, then the camber adjustments might make a bit more sense. I know that the EMPIs have a slightly different offset (designed I believe for VW bugs).

Hope this helps,

Wayne
Old 05-26-1998, 04:52 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)