View Single Post
A930Rocket A930Rocket is offline
A930Rocket's Avatar
Join Date: Oct 2003
Location: Mount Pleasant, South Carolina
Posts: 8,657
Sounds like the WG is plumbed properly. The hose on the side is vented to atmosphere. The hose on top get pressure from the intercooler.

The boost sending unit should have only one wire to it (as does the overboost sending unit).

The ivory colored sensor is the overboost sensor and the one with the red cover on it is the boost sending unit

Originally Posted by zaidigonzo View Post
there is one hose from the top of the wastegate going to the bottom of the IC.
Another hose comes from the bottom of the waste gate and goes to engine compartment and is open to air. Are these hoses switched? or do they go as is?
the boost sensor switch is the round orange one under the IC right. Has a drivers side connector with a wire to it and the passenger side one has no wire to it. Is this OK?

Last edited by A930Rocket; 11-10-2010 at 03:40 PM..
Old 11-10-2010, 03:37 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #7 (permalink)