Thread: turbo blow out
View Single Post
Sam Matthews Sam Matthews is offline
surfpangea
 
Sam Matthews's Avatar
 
Join Date: Jan 2008
Location: cathedral city california
Posts: 239
Garage
turbo blow out

I have a problem I installed a rebuilt high performance 3ldz that has had the internals enlarged with newer advanced wheels 61mm after install I had a leak in the center so I removed the turbo and installed a k-27 999 i fired up the car and after a few seconds white billowing smoke i removed the muffler and the center section had blew out lots of oil in the exhaust side and the compressor side. two turbos in a row so. the first turbo I used a custom bracket the second turbo I used the factory bracket I have a v band setup and the stock muffler band after the turbo the only thing I can figure is the clamping forces are flexing the turbo? Would a oil pressure malfunction Has anyone had this problem I have used the k-27 before with no problems. Any suggestions?
__________________
MB CL 600 6liter V12 daily driver
86 Corvette Stage 1 Nos (sold)
78 911sc Targa (sold)
77 930 stock 3.0 gsf header ,borla exhaust,gt30 BB turbo, V-band, full bay IC,WMI, 46 mm Adjustable waste-gate,Zeitronix wideband, Intergrated Car pc, Winlog interface Beta
Old 02-15-2011, 09:22 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)