View Single Post
Cocacolakidd Cocacolakidd is offline
Garage Helper
 
Cocacolakidd's Avatar
 
Join Date: Apr 2006
Location: Rogue Valley, Oregon
Posts: 2,176
Garage
Send a message via Yahoo to Cocacolakidd
The Roll-out Cargo Cover just screws to the top of the rear seat back. If you look at the back of the Cargo Cover Pull-out housing there are two small holes at either end of the housing - a screw goes through this hole from the inside and pointing to the back of the cover housing - these screws attach the pull out cover to the backside of the rear seat - simple mount...

There are though two small attaching loops on the inside of the rear hatch latches (Lower side and on body a female hatch post latch) that keep the pull out cover in extended place (Those should be there as they are apart of the rear female hatch catch).

Note 2: The window switches are universal as the single drivers side switch is the upside-down same as the two passengers side switches (In other words if you turn the drivers window switch upside down it is then the same as the two passengers side switches).
__________________
78-924 traded for 80-931 traded for 84-944 traded for 85.5-944 (7th one now).
UAV-M1 (Urban Assault Vehicle - Model 1)
Bless the lowered, and pass the nitromethane.
Pedal to the metal till you see the gates of hell then brake
NLA - No longer available is a four letter word

Last edited by Cocacolakidd; 03-21-2011 at 03:51 PM..
Old 03-21-2011, 03:46 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #3 (permalink)