View Single Post
fred cook fred cook is offline
Registered User
fred cook's Avatar
Join Date: May 2001
Location: Deep South
Posts: 4,653
outer window seals.......

The "fuzzy" seals at the bottom of the windows are something of a pain to install. I just did this and used a wide paint scraper to put pressure on the mounting pin without bending the seal out of shape. I used hand pressure from the handle and pressed on the bottom of the scraper with a stout screwdriver in order to get enough pressure on the seal so that the pins would pop into place. Be careful to not press against the inside of the door slot or you might bend it. Before starting, make certain that the holes are clear of the old pins as they can pull out of the old seal as it is being removed. Good luck!
1980 911SC coupe "Zeus" 3.3SS
god of thunder and lightning
Old 05-30-2011, 04:42 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)